In this article we cover how you use, manage and set up the Soundtrack player 3 which is our recent version of the player. If you have an older version of the player (you know this by checking if the player has LED lights– if it doesn't, you have an older version) please visit this article for more accurate information.
An introduction to the LED lights
The player has two LED lights that will communicate the players status. The left LED light will tell you if you have an internet connection and the right will show you if the music is playing.
The Soundtrack player's LED lights makes it easy to know the connection status of your device. Below is an overview of what each color indicates about your player's connectivity status.
Trying to connect
When the player is trying to connect, the left LED light will turn yellow.
When the player is connected, the left LED light will turn green.
Failed to connect
If the left LED light blinks yellow, the player has failed to connect to the internet. Make sure to check that your ethernet cable is plugged in correctly and check your router for internet connection.
- Log in to business.soundtrackyourbrand.com, go to your zone and click on Hardware Device Soundtrack Player and enter the device ID found on the bottom of the box.
- Connect the power cable. A light will show up on the front side of the box when it’s on.
- Connect the ethernet cable to give the streaming box Internet access, as well as an audio cable (RCA cable or 3.5mm audio cable) between the streaming box and your sound system.
- Enjoy the music! Your player will always stay up to date and download the latest software version automatically. Please note that it, therefore, may take up to 15 minutes from when you've connected the network cable until the music starts playing.
Using static IP
If you're using static IP, you need to configure the player with your IP information. Learn more here.
Dimensions and weight: Width 108 mm, Height 79 mm, Depth 38 mm (aluminum case). Weight 250 grams.
Certifications: CE (B), RoHS, FCC (B) & RCM
Operating system: Linux
Operating environment: 0 to +42*C, 0-65% relative humidity, non-condensing.
Storage conditions: -20 to +80*C, 0–80% relative humidity, non-condensing.
Connectivity: Ethernet (RJ45 10/100 Mbit). IPv4 & iPv6 compatible. Two RCA connectors (recommended) and one 3.5mm female headphone jack. Double USB connector (Type A Female) for troubleshooting. Two status LEDs (green/yellow/red).
Check out this guide for fast and easy troubleshooting.